China Tinting Tools Manufacturer Blog

All the products and tools in are newly produced and not used. Best quality! Lowest price! Fast delivery!

As a Car Painting Beginer,You Should Know..

2018-07-26 10:39 posted in Car Painting

Iif you are a newbie to the car-painting process, there are a number of very important things you need to know before you can start. You can either do some research on the Internet to know these things or ask the help of a paint professional. Knowing all the ins and outs of the painting process will prevent mistakes that will mar the meticulous labor you went through to make your car look sparkling new.

Choose your car paint

Knowing what paint to buy is very crucial in getting the outcome you want in changing your car’s color. While there have been numerous types of paints that have been used on cars, lately most car owners and paint professionals prefer urethane or the two-step acrylic enamel paints. If you were thinking of using lacquer, then you should know that this type of paint has overstayed its welcome in the paint industry and its use is even forbidden in most states in the US.

Urethane and acrylic enamel have higher viscosity compared to lacquer, even if they are actually applied in the same way. Usually, a mixture of one part primer to a half or one part thinner is already enough to give you that beautiful color you were aiming for. As a result, you will need fewer coats when using them instead of applying 20 coatings as what was usually done when utilizing lacquer paint. Most of the time, three coatings of base color and three topcoats of clear will do the job. If you still have serious doubts about your paint choice, you can ask the help of a professional in your community to give you some pointers.

The Spray Gun

Just like lacquer paints, syphon spray guns are already things of the past. These high-pressure lines are no longer used mostly because of what they can contribute to the problem of pollution. Lawmakers have even banned their use in many states.

Now, high-volume, low-pressure or HVLP spray guns are being used in painting cars. These spray guns feature tanks located at the top of the mechanism. Gravity feeds the paint into the gun instead of siphoning it from the bottle found underneath the spray gun system as with the case of the old syphon spray guns.

Although the location of the paint tank of these new-fangled HVLP spray guns might seem inconvenient for the user, they are known to be more efficient compared to the old spray gun models. They are known to deliver 80 percent of the paint to your car’s surface while only needing a line pressure of 10psi for its operation. This is definitely low compared to the 45 to 70psi needed by the syphon guns, which deliver a lowly 40 percent efficiency.

Safety and Preparation

In painting your car, you also need to be concerned about your safety at all times. Because of this, you need to prepare not just the materials you need in making your car look brand new. You also have to prepare the things such as window tint squeegees that will keep you safe during the entire paining process.

You need to buy yourself a complete paint suit to protect your clothing as well as your entire bodily system from the paint and other toxic materials you might be using. There are a number of cheap brands you can find in the market. You should also don on a respirator equipped with two air filters while you are painting. Pairing all these with gloves, goggles and some type of covering for your head will further keep you safe.

Your work area should also be kept clean at all times. You will achieve better efficiency with your endeavor if you dirt and dust are kept away from your work. Just think how frustrating it can be if you will find just one small mistake in what could have been a perfect panel.

It is imperative to note that before you start painting your car, especially with the use of a spray gun, you should practice first. Using test panels and making sure that your spray gun is kept clean at all times will help ensure the success of your painting endeavor.

What Should a Tinter Have in the Kit!

2018-07-16 16:14 posted in Tinting Tips

No matter professionals or DIY tinters, before car tinting you should have these tools in your kit so you have everything on hand when you need it:

  • Clean shop towels
  • Mixing cups
  • Stirrers
  • Paint sprayer
  • Tape and masking paper
  • Sanding and polishing tools
  • Safety equipment
  • Solvents for cleaning surfaces
  • A good quality primer
  • Body fillers for repairs if needed
  • Clear coat

Don’t rush the preparation work. You want to get it smooth and perfect before the final paint gets applied. Check your inventory and make a final list of the auto paint supplies you’ll need.

No More Car Scrathces!!! 9 Tips Help You Prevent and prepare Your Car Scrathes

2018-07-09 15:38 posted in Car Care

Are you exaperating with your car scratches,always not knowing how to deal with it?

Do not worry too much,all you just need is to know how.

Here are several tips on how you can prevent scratches from appearing on the paint of your car:

(1) If you can, take care not to park your car in places where a lot of people are probably going to pass by it. These include near supermarket entrances or next to vehicles that were not parked properly. You can never tell when sharp items carried by other people might scratch your car and you can be sure that careless owners will show the same utter lack of thought to your car as they do to their own.

(2)Always drive with care and steer clear of narrow lanes that may have overgrown bushes that could scrape the paint job of your car.

(3) Be regular about washing your car. This is the only way you can get rid of abrasive dirt from its body. Make sure to use lots of water and start washing from the roof down. Bad automatic car washes and careless washing can lead to probable dirt abrasion into the surface of your car paint, thus causing damage, swirl-marks or unappealing scratches.

(4) Keep in mind to never wipe away dirt or grime from the surface of your car with the use of your hands or with a dry cloth. There is a huge possibility that the dirt will nick your car paint.

(5)Even with great care, there are really instances when you cannot prevent scratches from appearing on your car paint. In times like these, there is nothing else you can do but repair them. To fix scratches, you have to remove the paint that surrounds the blemish right down to the level where it can no longer be seen. You can use a cutting compound with mild abrasive properties for this.

(6)There are cars that come with metallic paints that comprise of lacquer paint over a base coat and this usually protects the actual color layer. It is unfortunate for cars to have this kind of paint job because while lacquer is more resistant when it comes to scratches, any blemish on it can be more complicated to repair and may be more noticeable. Removing the lacquer layer, right down to the scratch level, can be more intensive and energy exhaustive.

(7)Although deep scratches are better taken care of by professionals, you can take care of them yourself. You can do this by using high quality wet and dry sandpaper with a grit of P1500 to P2000 with lots of cold water before using a compound paste to polish the area of the scratch.

(8)If you have been a victim of vandalism or you were part of an accident that caused minor impact damage to your car, this could result in scratches that go down to the metal of your car or your paint’s primer. This kind of scratch will need for the repainting of the whole damaged panel of your car. For a more polished repair, the neighboring panels may have to be painted as well.

(9) You should get the advice of a professional if you think your car needs to be repainted in order to fix a scratch. You should not attempt to do the repairs yourself with just any aerosol paint as you could end up doing more damage than good. Remember that if you wish for your car to look as good as new after the repair, you need to take extra care in fixing any blemishes. You need the right kind of car paint as well as the know-how with regards to its application.

Tips for Your Knife Care

2016-07-06 13:14 posted in Knife & Cutter

All of the knives need proper care if you want them to perform to their full potential.

Modern knife steel is very high quality material, but all metal will corrode through time. Occasionally oil the joints and springs of a pocket knife with a drop or two of oil. This will assure easier opening and closing and will prevent rust and lessen wear. Wipe the blades now and then with an oil-moistened cloth to prevent rust- especially if you live in a damp climate or close to the ocean. If your blade should get wet, dry it thoroughly. If your knife comes into contact with salt water or any substance you are not certain about, you should rinse it immediately with tap water, dry it and apply a light coat of oil.

Do not store knives in their sheaths. The leather collects moisture and creates pits on the blade.

Check the locking notch of lockbacks regularly to ensure that it will work properly. Keep all sand and grit out of the knife. Keep the mechanisms clean. Remember to never rely on a folding knife to be permanently locked in position.

Do not use the cutting blade as a can opener, chisel, pry bar, screwdriver or for any heavy work for which your knife was not designed. Also, don't use the back of your knife as a hammer. It may break the springs, handles or pin.

Handles made of wood can be occasionally rubbed with furniture polish or oil. Brass can be polished with household brass polish.

Remember to keep your knife sharpened -- a dull blade can be more dangerous than a properly maintained one.

For more window tinting knives or cutters tools,please click here:

Before Your Tingting,You should Know....

2016-06-20 16:53 posted in Tinting Tips

Never Install on front windsheild. With the exception of visor strips, it is illegal to tint your front windsheild. To View the tinting laws in your area please Click Here.
There is a clear liner attached to the film to protect the adhesive. To discover which side is the liner side, use to small pieces of transparent tape to pull a corner of the film apart. You will find 2 layers, the clear layer is the protective layer.
It is best to install the film with the vehicle in a shaded, well lighted, wind and duct free inclosure between 40 and 90 degreed F; where the weather will not freeze for atleast 3 days.
It is best to clean the vehicle inside and out before installing the film to minimize contamination.
Read ALL of the intructions before beginning.
Apply the film on the inside of the windows only, never on the outside.
You can never use too much application fluid!
Creases cannot be removed. Handle film carefully and do not crease it.
It is best not to apply tint film, or let it dry, in direct sunlight.
Always use a sharp razor, never scissors, to cut or trim film.
Tint can be installed on factory defroster lines, but cannot be used on plexiglass, plastic or vinyl.
Window film actually makes rear defrosters work better, but do not scrape defroster lines with the razor when cleaning or preparing. Just squeegee carefully.

Do not use on thermal or double paned windows.

Buy window tint installation tools, please view our site:

Great Value

We offer professional car tint installation tools with competitive prices.

Worldwide Delivery

We ship to over 200 countries & regions.

Safe Payment

Pay with the world’s most popular and secure payment methods.

Shop with Confidence

Our Buyer Protection covers your purchase from click to delivery.

24/7 Help Center

Round-the-clock assistance for a smooth shopping experience.