China Tinting Tools Manufacturer Blog

All the products and tools in Tintingtool.com are newly produced and not used. Best quality! Lowest price! Fast delivery!

Do you Know the Types of Sprayer?

2016-03-24 10:51 posted in About Sprayer



Compression Sprayers:

(Also described as tank or pump-up sprayers). These sprayers have a tank that will hold anywhere from a liter to several gallons of pre-mixed product. You measure the amount of product recommended for the amount of water the sprayer holds, mix them together and then pump up the sprayer. The compressed air forces the mixture out through a nozzle or wand. The advantage of a compression sprayer is that it delivers the most accurate a dilution in the finest spray, minimizing run off. Another advantage is that you can take it anywhere you can carry it. The length of your hose does not limit you. They also are easier to use in tight places.


Hand Pump Sprayers:

Just like the hand-pumped sprayer that comes with a window cleaner, many garden products come in a ready-to-use dilution with a hand spray top. All you need to do is read the label for precautions and recommendations, then squeeze. The advantages to this type of mister are that it is economical; extremely portable delivers a fairly fine spray and is easy-to-use. The disadvantage is that if you have a large area to spray, it can be very tiring to use.


Hose-End Sprayers:

There are several variations on this type of sprayer. These sprayers are empty and adjustable to be used with any number of products and different dilution rates. All hose-end sprayers are used with concentrated products. Most have an on/off valve. They mix water from your hose with the product as it passes through the nozzle, using your own water pressure to power the sprayer. They all have the advantage of being lightweight and inexpensive. Since they are powered by water pressure, they tend to be able to spray farther than other types. They also have some disadvantages. They put out such a large water/product droplet that much of the product runs off the plant and you end up using a lot more of the product.


Ready-to-Use Hose-End Sprayers:

These sprayers are the ones that come attached to the container of the pre-mixed garden product. The advantages of these sprayers are that they make the product more convenient to use since they don’t require any mixing or measuring. They are already calibrated for that product. You just attach it to your hose and spray. The disadvantages are that these sprayers can only be used with their specific product and cannot be adjusted for use with anything else. Because they put out large droplets of the product mix they are not as efficient. The dial hose-end sprayers are very easy to use. You simply pour the liquid product into the sprayer, put the top back on and (following the recommendation on the product you are using) set the dial to the recommended rate (such as 2 tablespoons per gallon). Then you attach your hose and spray. The dial hose-end sprayers do not require you to measure out a specific amount of the product. Once you have finished spraying, you can pour the remaining product (it has not been diluted) back into its original package. The disadvantages of dial hose-end sprayers are the same as all other hose end sprayers.


Hose-End Sprayers without a Dial:

If you have this type of sprayer, it would really be best to replace it with one with a dial. They are much more accurate. These sprayers are complicated and can be very confusing. These sprayers are not ready to use. They have their own jar (usually plastic) and require measuring and premixing of the chemicals. It will say on the label of the jar that it is a 4 gallon, 6 gallon or larger. Those capacities indicate how many gallons of spray can be made at once with the sprayer. The semi-concentrated water/product mixture in the jar is siphoned out as the water passes through the spray head.


We are a professional window tinting tools manufacturer, of course we may provide sprayer, our window tinting sprayers are including trigger sprayer,pump sprayer,tank sprayer and pressure sprayer.

Do You Know How to Use Your Scraper Safely?

2016-03-03 10:39 posted in About Scraper


Scraper plays an important role in window cleaning and tinting. With the help of a power scraper, you can remove tiles, old paint or wallpaper in a fraction of the time it would take to do so by hand. Like all other power tools, the use of a power scraper requires you to follow some important safety precautions.

1 Work in a Clear, Well Lit Area.A power scraper contains sharp chisels that move at high speed and force to remove bits of unwanted material from surfaces. To prevent accidents, you must work in a well lit area. Avoid clutter around your work place as well.

2 Keep Power Scraper Away from Moisture.Like all power tools, a power scraper must be protected from moisture. Never use a power scraper in wet conditions, as this can cause electric shocks. Leaving the tool exposed to the weather can also damage it and cause it to malfunction.

3 Wear Adequate Protection.When you work with a power scraper, you must always wear safety goggles, because there is a high risk of flying particles. You can also wear a face mask to prevent fume inhalation and use ear protection to prevent damage to your hearing.

4 Ensure a Steady Footing.Wear heavy rubber soled footwear to improve your footing and also to reduce the chances of electric shocks. Never overreach or stand on an unsteady, wobbly surface.

5 Store the Power Scraper when it is Not in Use.After you finish work, you must store the power scraper in a safe place. This will keep it protected from the weather and also keep it away from the wrong hands.

6 Disconnect the Power Scraper before Changing Chisel.Every time you have to change the chisel or bit, you must turn off the power scraper and disconnect it beforehand. Leaving it on may lead to accidental starting and can cause severe injury.

7 Perform Required Maintenance.Follow the manufacturers recommendations for lubrication and maintenance of the power scraper. It is advisable to have maintenance and repairs performed by qualified personnel only. If you do the maintenance yourself, practice extreme caution and unplug the tool beforehand.

8 Avoid Forcing the Power Scraper.Never apply excessive force when you are using a power scraper. This will lead to unsatisfactory results and will also increase the chances of the tool buckling backwards.

9 Never Touch the Chisel Immediately after Finishing a Job.After you finish working, the chisel will be extremely hot for some time. It is therefore necessary to keep the tool aside for some time after an operation. Change the chisel when it is cool to the touch.

10 Carry the Tool Carefully.When you carry the power scraper around, hold it by the handle and avoid touching the switch. Never carry the tool by its cord. Never pull on the cord to unplug the tool and avoid yanking the cord around.


Are you ready to buy Car Window Tint Scraper Tools to tint your car,TintingTool.com is your best choice!


Do You Know the Correct Way to Use Pressure Sprayer?

2016-02-19 10:25 posted in About Sprayer


Sprayers come in either plastic or metal, and in a wide range of sizes; some backpack sprayers have a pump handle so you can keep up the pressure inside the tank without having to take off the backpack. Here's how to use these tools.

Test the sprayer every time you use it by first filling it with water. Pump up the pressure and test to see that the nozzle is not plugged. Release the pressure by unscrewing the lid slightly. Remove the lid.Measure the amount of chemicals exactly. More is not better in the case of garden chemicals. You can do serious injury to plants by overfertilizing or adding too much herbicide.Add the chemicals to the water in the sprayer. Rinse the measuring device by adding more water to the tank to make up the balance.Screw the top on, being careful not to cross the threads. Tighten so that the pressure will not escape from the tank.Pump the handle to increase the pressure inside the tank.Spray the plants, making sure to cover both upper and lower sides of the leaves. There needs to be visible moisture on the leaves for the applied material to work.Spray out all of the material in the tank. Don't leave any unused chemical in it.Clean the empty tank over a dirt area, never over concrete or in a sink. Rinse the tank three separate times, spraying clean water through the nozzle each time.Store with the cap off in a protected area away from light and heat.

As a window tinter, I used many different window tinting sprayers, such as tinting trigger sprayer, window tint pum sprayer, window tint tank sprayer and window tint ppressure sprayer, triggler is better, I think.


Several Ways to Make your Home & Car Window Cleaner

2016-02-06 09:36 posted in Window Tinting


It is better not cleaning windows while they are in direct sunlight. Your cleaning solution will dry too fast.You should keep the squeegee blade dry by wiping it with a tinting microfiber cloth after each stroke.You should replace the rubber blade of your squeegee when necessary. The smallest nick in your blade can cause streaking.You should squeegee in a pattern from top to bottom, or side to side.When cleaning the inside and outside of your windows, work the top to bottom pattern for inside windows and side to side pattern for outside windows. By doing this, you'll be able to identify which side of the window any streaks may occur.If you find the water on the window is muddy looking, the grains of dirt might be catching the rubber when you squeegee. Wash the window again, using extra water to flush the excess dirt from the window.If you find excess soap and foam in the water, look into your bucket for soap foam. An inch or more is too much. Fill again with clean water.You may use a spray bottle filled with rubbing alcohol on French windows. Spray four windows, scrub them, and squeegee. The alcohol will evaporate, leaving nothing to wipe.

Here are some Tinting Lint Free Towel, go ahead: https://www.TintingTool.com/cleaning-pads-and-cloths/

Does Window Tinting Film Do Any Good?

2016-01-27 17:06 posted in Window Tinting


A lot of people have this false impression that tinted glasses do nothing else however assistance keep your room cool. Absolutely nothing might be even more from fact for they offer a number of other advantages.

Obviously, they help you reduce in energy costs by allowing you to minimize the usage of the air-conditioner. However, the most crucial function that house window tinting provides for you is to obstruct the harmful ultraviolet rays from the sun. Today you can easily get a house window film that can obstruct virtually 99 percent of ultraviolet rays in the market.

Not only does this protect your eyes and health, it will likewise assist your decor and other decors from getting faded. Moreover these window tints will likewise enhance your tv viewing experience too. Not will you be interrupted by the glare originating from outdoors your house. The option of tint depends on just what you want to accomplish with it.


So, you may tint your home glass or car window glass for obstructing the harmful ultraviolet rays from the sun besides cooling, what you need to do is buying film and professional tint tools from website, and finish it on the weekend,that's it.

Great Value

We offer professional car tint installation tools with competitive prices.

Worldwide Delivery

We ship to over 200 countries & regions.

Safe Payment

Pay with the world’s most popular and secure payment methods.

Shop with Confidence

Our Buyer Protection covers your purchase from click to delivery.

24/7 Help Center

Round-the-clock assistance for a smooth shopping experience.